Fault insertion technology
Fault insertion, fault injection or FI solutions are used to apply the kinds of electrical...
Find out moreH1-LINSWF
LIN switch card with fault insertion
This LIN switching card is a 16-channel configurable LIN grouping and switching board with fault insertion capabilities.
Each board is compatible with add2 HIL racks, occupying three slots and supporting up to 16 incoming LIN buses, which may be daisy-chained (via the LIN routers), to allow large-scale LIN networks to be built.
The LIN channels may be controlled from add2’s PC-based configuration software, HCU, or the configuration CAN bus to open-circuit each LIN bus.
Fault modes may be applied manually from the configuration GUI, via COM for automation purposes or via the configuration bus. Grouping/routing of LIN signals for each LIN ECM connection is achieved by a short plug-to-plug connection at the front of the LINSWF.
Each board is also fully short and overload protected.
Interested?Leave your details below to receive a copy of the latest Genix leaflet: |
Features
| • Software selection of LIN channels | • External I/O selection of LIN channels |
| • CAN selection of LIN channels | • Fault insertion via configuration bus |
| • Optional self-test diagnostics |
Specification
| Parameter | Specification |
| V+ to V- | 37V |
| LIN voltage range | 0 to 16V |
| Isolation | >30V |
| Maximum power dissipation | 2W |
| LIN Imax Out (continuous short) | 1A |
| VBATT fault lines | 2 |
| 0V fault lines | 2 |
| Incoming LIN bus support | 16 |
Related applications
-
-
Hardware-in-the-loop testing applications
Hardware-in-the-loop (HIL) testing is a test methodology that can be used throughout the development of...
Find out more -
‘Genix’ technology
Genix is our patented technology utilised in many of our products. The key to Genix...
Find out more -
Model-based design using Simulink
Using a model-based design for embedded control systems, simulation and test systems allows you to...
Find out more