Case studies
Our work allows customers to innovate, delivering more feature-rich and robust functionality to consumers. For an insight into the specifics of our work, we have compiled the following case studies. Should you have any further questions, why not call us?
If you have worked with us and want to share your story with others, please contact us and we will feature it on these pages.
Enhancing ECM robustness during vehicle development
Read how add2 helped Changan Automobile to increase the electrical robustness of its control systems during sub-system and full vehicle testing. By providing enabling technology that can...
Read More
Testboard verification & validation using dynamic signalling
Read how add2 helped Ford to further strengthen its verification & validation testing processes, introducing simulation technologies earlier to shorten the development cycle, increase its value and...
Read More
End-of-line Automotive Production Testing
Read how add2 helped Plastic Omnium to enhance in-line electrical testing during the manufacture of vehicle bumpers, increasing component visibility. This is achieved through the production of...
Read More
add2 chosen as tools vendor for UK technology programme ‘EVoCS’
Working within a UK technology programme (TSB supported) group with Jaguar Land Rover, Warwick University and QinetiQ, add2 was chosen as the test equipment tools vendor to provide...
Read More
Genix HIL system pioneered by add2
add2 worked in partnership with Jaguar Land Rover and Warwick University under the TSB-supported EVoCS project (Evolutionary Validation of Complex Systems). During its course, a reconfigurable HIL...
Read More
Land Rover vehicles achieve EPA certification with add2 and The MathWorks
Read how add2 helped Jaguar Land Rover enable four-wheel drive vehicles to pass emissions tests requiring two-wheel drive operation, reducing a significant amount of development time. This...
Read More
Jaguar reduces development costs with MICROGen, MathWorks rapid prototyping and code generation tools
add2 assisted Jaguar Land Rover to reduce the costs of testing new product functionality by adding a general-purpose ECU to an existing vehicle. Using MathWorks tools to...
Read More
Jaguar takes add2 for a test drive
When Jaguar Land Rover needed to take electronic control module testing a stage further, there was only one road open to its engineers. Today, distributed control is accepted...
Read MoreLatest news
-
How to Assemble Automotive Ele...
12th December 2018 · If you assemble automotive electronics within bumpers, spoilers and door modules, you need to ensure they are assembled correctly each time. This includes a check to ensure...Read more