Hardware-in-the-loop testing applications
Hardware-in-the-loop (HIL) testing is a test methodology that can be used throughout the development of...
Find out moreH1-ECUPSU-SW
ECM power supply switch card
The H1-ECUPSU-SW power supply switch card is a 16-channel configurable switch board with 4 connectors. Two supplies are accommodated with the ability to select from the supply or via a current measurement board, which can be directed through the board to allow current measurement of one or a combination of ECMs. The board’s ‘make-before-break’/’break-before-make’ timings may be pre-configured to ensure no power interruption occurs when making current measurements.
The card is normally used in large multi-controller HIL systems to test one or more electronic control modules’ power supply for issues such as quiescent current or current management and protection functionality. All ECM facing lines are protected against overload and short circuit.
The power supply section may be controlled from add2’s PC-based HIL configuration software, HCU, or the configuration CAN bus. One LED per ECM power connection is available to indicate the supply selection and trip status. The channels can be grouped to support multiples of 10A with low voltage drops.
Interested?Leave your details below to receive a copy of the latest Genix leaflet: |
Features
| • HCU software selection of power supply | • External I/O selection of power supply |
| • CAN or RS485 selection of power supply | • Configurable switch-over timings |
| • Fully protected supply lines |
Specification
| Parameter | Specification |
| V+ to V- | 37V |
| CAN H or CAN L | 0 to 16V |
| Imax in (continuous use) | 63A |
| Maximum power dissipation | 35W |
| Channels | 16 |
| Imax in (continuous use/short – total both supply | 100A |
| Maximum ECU line current continuous | Per minimum per line 10A |
| ECM line deliverability | 10A minimum |
| Operating temperature | 10..+50°C |
Related applications
-
-
‘Genix’ technology
Genix is our patented technology utilised in many of our products. The key to Genix...
Find out more -
Model-based design using Simulink
Using a model-based design for embedded control systems, simulation and test systems allows you to...
Find out more -
Fault insertion technology
Fault insertion, fault injection or FI solutions are used to apply the kinds of electrical...
Find out more